Featured Presses:

TDP Benchtop Model Tablet Press
TDP-1 Benchtop Model Tablet Press
TDP-5 Benchtop Model Tablet Press
TDP-30 Benchtop Model Tablet Press
Flower-Basket Type Large Diameter Press
GZPK100A Series High-Speed Rotary Press
ZP100 Rotary Press
ZP35A/ZP37 Rotary Press
ZP33 Rotary Press

This unit is designed for pressing tablets from a variety of materials for research & development and for small-scale production of nutriceuticals, herbals, and other products. This is a bench-top unit, semi-portable, that is motor-driven but can also be hand-driven for adjustment and testing purposes. One punch & die set is included. Fill depth, tablet thickness, and punch pressure are all adjustable. This is by far our most popular unit.

Technical specifications of TDP Benchtop Model Tablet Press:

Dies: 1 set

Maximum Pressure: 1.5 KN (338lbs)

Maximum Dia. of Tablet: 12 mm

Minimum Dia. of Tablet: 2 mm

Maximum Depth of Fill: 11 mm (depends on density of material)

Maximum Thickness of Tablet: 6 mm

Production Capacity: 6000 pieces/hour

Motor: 110 volts , 12 amps or 220 volts , 6 amps, single-phase, or 220 volts , 5.4 amps three-phase

Overall Size: 580 X 450 X 625 mm

Net Weight: Approximately 230 lbs.

Press color, and weight may vary slightly, otherwise specifications will always be the same as shown.

 
Special Bonus: We make several special modifications to this press here in the U.S. to upgrade it substantially, at no extra cost to you!

Double-strength motor for a sweet, smooth-running press with extra pressure!
comes wired for (your choice):

110 volts at 12 amps single phase (with power cord and plug), or

220 volts at 6 amps single phase (with power cord and NEMA 6-15 plug), or

220 volts at 5.4amps three phase (no power cord; customer must wire).

Virtually indestructible U.S.-made drive-belt! No belt adjustment or replacement needed for years!

Grease gun with FDA-Certified food grade grease (with teflon) installed to make maintenance a snap!

Close Print